Main Menu
| |
|
SHOCK WORK Includes Fluids |
|
|
Revalve Most Single Shocks |
$190-275 |
|
Oil Change Conventional Twin Shocks Rear |
$50 @ $85/Pr |
|
Oil Change Only (Single Shock) |
$90 |
|
Oil Change w/ MEI Valves Already Installed |
$80 |
|
Springs |
$100 UP |
|
Spring Mod's |
$65 Up |
|
Rebuild Plus Parts |
$125 |
|
WP 90-08 |
T&M |
|
Vintage Work |
|
|
Oil Change Conv Fork Or Twin Shock (1) MEI Modified |
$90 |
|
Oil Change, Shock Conv Piggybacks / Pair |
$90 |
|
MEI Revalve Fork & Shock Plus Parts |
$350 |
|
FORK WORK Includes Fluids |
|
|
Forks, Convert Dampen Rod To Cartridge Type 20/25 mm Up |
$600/1500 |
|
Fork/Seal “D” Rod Service |
$90/PAIR |
|
Fork/Seal “D” Rod & Fit Springs, Service |
$110/PAIR |
|
Rebuild (D&A) Including MEI Valving, Plus Parts |
$200/PAIR |
|
Rebuild (D&A) Without Valving, Plus Parts |
$130/PAIR |
|
Rebuild (D&A) Without Valving With Spring Purchase, Plus Parts |
$95/PAIR |
|
Revalve Damping Rods Plus Parts |
$85/PAIR |
|
General Fork & Shock Service + Parts |
$150 |
|
Ud Forks & 1 Shock Service/Oil Change Plus Parts |
$175/set |
|
MEI Revalve UD Forks & Shock/Set (Plus Parts) |
$350 |
|
Full Fork Service W/Purchased Emulators |
$100 |
|
Oil/Seal Change W/O MEI Valve Showa UD Top Comp |
$135 |
|
Oil / Seal Change W/MEI Valves Already Installed, +Oil & Parts |
$125/PAIR |
|
Fork / Shock Dyno Test, Set Up & 1st Test |
$55 1St |
|
Fork / Shock Dyno Test, Additional Test |
$35/test |
|
Custom Vintage Fork / Shock Service |
CALL |
|
Fork Tube Hone Inside Ea |
$25 |
|
CARTRIDGE FORK REVALVE, Includes
Installation, Plus parts: |
|
Kayaba , MX Basic Models |
MEI $200 "RT Gold Valve" $295.00/PAIR |
|
Kayaba, RR Basic Models |
MEI $200 "RT Gold Valve" $295.00/PAIR |
|
Showa , MX Basic Models |
MEI $200 "RT Gold Valve" $295.00/PAIR |
|
Showa, RR Basic Models |
MEI $200 "RT Gold Valve" $295.00/PAIR |
|
WP 90-08, MX |
T&M |
|
Fork Spring Mod's |
$55 UP |
|
New Fork Springs |
$100 UP |
|
Repair Dented Sliders |
$35 UP |
|
Straighten Fork Tubes |
$35 UP |
|
MISC. |
|
General Shop Labor |
$55/HR |
|
General Shop Labor, Machine/ Engine |
$75/HR |
|
Misc. Outside Or Purchase Parts |
|
|
Shop Supplies On Service |
$10, 15 25 |
|
Flow Bench Work, Initial Set up & Test |
$125 |
|
Flow Bench Work, Additional Testing Per Hour |
$75/Hr |
|
,
,
and 