|
M1555 |
Porting, Flow Bench |
$175-350 |
|
M1502 |
Match Head/Intake Manifold, Each |
$25-35 |
|
M1040 |
Head Modifications |
$50-75 |
|
M1090 |
4 Cycle Combustion Chamber Mod Cnc/Mill, Each |
$80-150 |
|
M1092 |
4 Cycle Shorten Valve Guide Per/Pair |
$25-50 |
|
M1093 |
4 Cycle Machine Valve Guide For Pc Seal Per/Pair |
$25-35 |
|
M1100 |
4 Cycle, Head Disassembly/Clean/Blast |
$25-65 |
|
M1083 |
4 Cycle Head / Valve Multi Angle Seat/Face/Lap Ea. |
$25-45 |
|
M1095 |
4 Cycle Head / Intake - Machine/Match/Blend Ea |
$75 |
|
W8020 |
Plain Bearing Crank, Polish Journals Each |
$18 |
|
R0090 |
2 Cycle, Head Surface, Remove Warp .001-.005 |
$15-45 |
|
R0092 |
2 Cycle, Flywheel Weights Or Light |
$125-250 |
|
R0080 |
2 Cycle, Crank Rebuild Out Of Engine |
$65-250 |
|
R0085 |
2 Cycle, Crank Rebuild Engine Complete |
$100-350 |
|
E0152 |
2 Cycle, Full Engine Disassembly |
$75-200 |
|
E0105 |
2 Cycle, Top End Service Out Of Chassis |
$75-150 |
|
E0204 |
2 Cycle, Top End Service In Chassis |
$125-300 |
|
E0110 |
2 Cycle, Bottom End Inspection W/Top End Service |
$35 |
|
E0100 |
2 Cycle, Split Cases & Inspect Only |
$100-150 |
|
E0101 |
2 Cycle, Split Case & Replace Seals & Mains, Single |
$145-250 |
|
E0150 |
2 Cycle, Split & Match Cases |
$180-375 |
|
E0120 |
Transmission Work |
$75-350 |
|
E0122 |
Undercut Trans, Upshift Only 5/6 Speed |
$200-325 |
|
E0124 |
Undercut Trans, Up / Down Shift 5/6 Speed |
$275-450 |
|
|
Computer Developed Exhaust Spec |
$65-120 |
|
|
Computer Analyzed Engine Performance |
$75-150 |
|
M1001 |
Cyl. Overbore 1 Step & Edge Ports |
$45-75 |
|
M1002 |
Cyl. Overbore 2,3,4 Step & Edge Ports |
$75-175 |
|
M0090 |
Cyl. Dress Hone |
$20 |
|
M0080 |
Cyl. Edge Ports |
$20 |
|
M0001 |
4 Cycle Head Porting & Mods |
$400 Up |
|
M1200 |
4 Cycle Heads, Os Valves Installed/Fitted |
$35-100/Valve |
|
W8018 |
Magna Flux / Zyglo / Dye Check Per Setup |
$25 |
|
R1000 |
Exhaust, Dent Removal |
$35-95 |
|
B0199 |
Part Balancing, Crank, Rod, Piston, Etc. |
$45 Up |
|
C1001 |
Engine/ Parts “Tech Line” Coatings |
Call |
|
W2900 |
Engine/Chassis Dynotesting W/Readouts/Reports |
$85 Setup & 1st Test, $65 Additional |
|
T0015 |
Chassis Engine Dynamometer Testing, Setup & 1 St Test |
$175 |
|
T0016 |
Additional Chassis Engine Dynamometer Testing |
$125/Hr |
|
T0200 |
Engine Only Dynamometer Testing |
Call |
,
,
and 